Model XDC Temperature Test Instrument

An XDC-2 Undergoing High Temperature Qualification Testing

XDC-2 Typical Operating Specifications ^(1.)

• Temperature Range: 1,075K to 1,925K (800°C to 1,650°C)
• Temperature Resolution: + 0.5% at over 800°C, Type B Thermocouples
• Configuration: Horizontal Differential Measurement Module
• Thermal Expansion:
  Sample length: Up to 50 mm
  Sample diameter: 10 mm to 19 mm
  Sample support: Alumina and Sapphire material
  LVDT range: + 6.35mm
  LVDT resolution: + 0.1 μm
  LVDT range accuracy: + 1.9 μm ^(2.)
  Heating/cooling rate 150°C/hour or better

• Thermal Diffusivity:
  Range: 0.01 cm2/s to 1 cm2/s
  Resolution: +0.01 cm2/s

• Thermal Conductivity:
  Range: 0.01 W/m K to 500W/m K
  Resolution: +10% or better
• Test Environment:
  Oxidizing or inert
  Air, N2, CO2, He, Ar, Vacuum purge ^(3.)
  Digital Thermal Mass Flow Meter/Controller, 3 units
• Data Interface:
  Network: RJ45, 10-100baseT LAN

• Power and Cooling:
  208VAC, single phase, 45A service, other voltages available upon request
  Water, up to 5 GPM at 10-37°C
• Size and Weight: (LWH, pounds)
  Measurement System: 72” x 30” x 58”, approximate weight 900#
  Minimum operating clearance required: 96” x 36” x 96” Shipping: 80” x 42” x 55”, Approximate shipping weight 1,200#

Notes:

1. Specifications subject to change without notice
2. Accuracy is improved over smaller temperature ranges
3. A vacuum environment at high furnace temperature is not recommended